1169984 9

New product

Hydraulic scissors lifting table with tandem scissors

Add to wishlist

Capacity (kg)1000
Platform length (mm)9000
Platform width (mm)750
Height (mm)240
Effektive stroke (mm)1100
Engine power (kW)2,2
Lift time (s)35
Aggregate set-upexternal

Special hydraulic shears lifting table with tandem shears

Application:

For the hot water boiler industry

  • Robust design to withstand large loads
  • No deformation on the platform caused by applied forces
  • Plain bearing for long service life
  • Use of high-quality plunger cylinders
  • Solid floating bearing rollers

Technical specifications:

Payload: 1000 kg
Lifting range: 240 mm - 1340 mm
Effektive stroke: 1100 mm
Lifting time: approx. 35 sec
Lowering time: approx. 35 sec
Design height: 240 mm
Platform
- dimensions: 9000 x 750 mm
- material: 6 mm  smooth sheet metal

Hydraulic unit:

  • outside lifting table
  • red / black lacquered
  • on a leak oil pan on 7 m hose
  • max. duty cycle 10%

Motor:

  • 2,2  kW
  • Valve:   24 VDC

Hydraulic cylinders:

  • plunger cylinder, red lacquered
  • piston rod hard chromium plated
  • operating voltage: 400 V 3/N/PE 50 Hz
  • control voltage: 24 VDC

Control:

  • foot switch UP / DOWN (dead man) with EMERGENCY / OFF on operator 's stand with 10 cables
  • Adjustable lifting and lowering limit switches
  • IP 54 for inside area
  • main switch or EURO connector on the customer side

Safety:

  • circumferential foot guard switchboard
  • tube breakage protection in the cylinder
  • lowering brake valve
  • maintenance supports
  • pressure relief valve
  • the design complies with the applicable EN1570-1 guidelines
  • safety controls of our standard lifting tables have been defined on performance level "c" according to DIN EN ISO 13849 (S2-F1-P1). If the lifting table is part of a customer-specific system, for example, you must report it and tell us "your" performance level

Surface:   APPLICATION IN THE INTERIOR:

  • steel structure blasted with pretreatment according to EN ISO 12944 in combination with ST 3 pretreated parts according to DIN ISO 8501/1.
  • coating material 2 K-PUR thick film with high chemical and oil resistance.
  • standard colour RAL 5010 or RAL colours according to customer requirements
  • If a white or yellow coating or the shade RAL9006 or RAL9007 is desired, then we impose 2% surcharge.
  • we do not paint fluorescent colours

Particularities:

  • A roller track is mounted upon customer's request
  • 25 lifts / day
  • Stat. quantity divider ensures the shears operate in unison
  • Set-up bolts with rubber buffer as end position damping

Contact

Do you have questions about the product? Do not hesitate to contact us!